The major crankshaft details of the MAN B&W 5L 16/24 are as follows:

In the case of the MAN B&W 5L 16/24 crankshaft, the crankpin diameter is relatively small at 130.00 mm, with a bearing width of only 56.00 mm. To facilitate onsite crankshaft grinding of the crankpin, RA Power Solutions has designed and developed a dedicated onsite crankshaft grinding machine. This machine can be inserted through the inspection window, allowing grinding to be carried out efficiently.

RA Power Solutions deputed technicians, along with equipment, and the following actions were taken:

i) Excessive ovality of 0.97 mm was observed on crankpin No. 03 of the auxiliary engine. Line marks were also noted.
ii) All other parameters, such as hardness, MPI (for crack detection), and visual inspection, were checked and found to be within limits.

iii) Grinding of crankpin No. 03 was carried out, and the diameter was maintained at 128.50 mm (undersized by 1.50 mm).

Advantages of Engaging RA Power Solutions for Repair of Crankshaft – MAN B&W 5L 16/24

i) As a designer and manufacturer of onsite crankshaft grinding machines, we undertake modifications to the equipment, if required, to ensure the successful repair of the crankshaft.

ii) In this case, since the crankpin diameter is only 130.00 mm and the bearing width is 56.00 mm, we developed equipment capable of both grinding and polishing.

iii) We maintain a stock of bearings for popular engine makes and models, including undersized and special sizes. In this case, the required bearings were carried by our technicians, and the engine was commissioned immediately after the crankshaft repair.

Availability of Undersized Crankpin Bearings in Stock of MAN B&W Engine Model No. 5L 16/24

RA Power Solutions has consistently dedicated itself to delivering exceptional and prompt service. With over 46 years of experience, we have successfully repaired more than 10,000 crankshafts worldwide.

We have been regularly providing our services in South Africa, Nigeria, Cambodia, Tanzania, Brazil, Canada, Australia, Bangladesh, Greece, Haiti, Hong Kong, Indonesia, Kenya, Malaysia, Maldives, Kenya, Kuwait, Madagascar, Mexico, Nigeria, Oman, Philippines, Saint Lucia, Saudi Arabia, Singapore, Spain, Sint Maarten, Sri Lanka, Suriname, Thailand, Togo, United Kingdom, United States, Yemen, Zambia, etc.

For more information regarding crankshaft grinding services, please contact us at rajshahani@rapowersolutions.com or info@rapowersolutions.com or call us at +91 9582647131 or +91 9810012383.

The post Machining of MAN B&W 5L16/24 Crankshaft appeared first on Crankshaft Grinding Repair.

We have developed a revolutionized tooling which has the capabilities to execute the repairs to close tolerances as stipulated in the engine manufacturer’s manual.

Case Study of Repair of MAK-1 8CM32C Engine Crankshaft In Burkina Faso, West Africa

The major details of the crankshaft of the MAK-1 8CM32C Engine are as follows:

i) Due to the repeated failure of bearings, it was decided by the client to get an audit of the crankshaft for all the major parameters. RA Power Solutions deputed two (2) technicians along with the onsite crankshaft grinding machine from New Delhi to Burkina Faso. During the initial inspection, the following was checked and observed.

a) The dimensional inspection of the crankpins was conducted, and excessive ovality was observed in all the crankpins. The readings for all the crankpins are pasted below:

b) As protocol, all the crankpins were checked for hardness by a portable hardness tester and were found within limits.

c) MPI was also undertaken to check the cracks, and no abnormality was observed.

ii) The grinding of all the eight (8) crankpins was executed onsite by our technicians. The first step size and tolerance of 0.02/0.03 MM were maintained.

In Place Machining of Crankshaft of MAK-1 8CM32C Engine

RA Power Solutions has been successfully executing the repair of high-diameter crankshafts up to 700 mm. We also specialize in onsite grinding of small-diameter crankpins with a bearing width of the crankpin as low as 50 mm to execute onsite such types of complex crankshaft repairs onsite. We have developed special-purpose onsite crankshaft machining equipment by which the repairs can be executed. We execute repairs for Marine, industrial, stationary power, and offshore sectors all over the world.

Our technicians are available to travel worldwide on short notice. Additionally, several of our technicians hold valid US visas, enabling them to travel to South America, the Caribbean, and other destinations as needed.

At RA Power Solutions, we provide specialized crankshaft grinding machines, onsite crankshaft grinding repair, insitu crankshaft grinding, Onsite crankshaft grinding machines,  insitu crankshaft grinding machines, crankpin bearings, metal stitching, metal locking, engine block repair, crack repair by metal stitching, cast iron crack repair, crankpin polishing, inspection of crankshaft, crankshaft inspection, rebabbitting bearing, babbitt white metal, engine overhauling, grinding of crankpin, connecting rod, and turbine shaft bearing services worldwide, including South Africa, Singapore, Greece, Dubai, Iraq, Iran, Malaysia, Colombia, and Brazil.

For more information regarding crankshaft grinding services, please contact us at rajshahani@rapowersolutions.com or info@rapowersolutions.com or call us at +91 9582647131 or +91 9810012383.

The post In Place Crankshaft Machining and Grinding of MAK-1 8CM32C Engine In Burkina Faso , West Africa appeared first on Crankshaft Grinding Repair.

Action Taken By RA Power Solutions For Repair of Crankshaft Yanmar 8N 330L EV

i) Since the vessel was anchored near Panama Port, RA Power Solutions deputed two technicians having a valid US VISA and Seaman book. Both technicians flew to Panama along with onsite crankshaft grinding machine and measuring instruments and boarded the vessel within 48 hours of the client’s first information of the breakdown of crankshaft of Yanmar 8N 330L EV.

The Details of Engine / Crankpin are as following:

ii) RA Power Solutions technicians inspected all the crankpins (8 Nos) to check the taper & ovality, the dimensions of observed are pasted below.

iii) On going through the readings, it was observed that the crankpin number #02 has developed excessive ovality of 0.43 MM, against the tolerance of 260.00 MM + 0.03 MM. This is considered very much on the higher side. All other crankpins also have ovality ranging from 0.09 MM to 0.10 MM, The bearing line marks and rough surface on the crankpin were observed.

iv) As a Protocol, hardness was checked of eight (8 Nos) Crankpins and was observed within limits.

v) Crack detection was also conducted, and no crack was observed on damaged crankpin number #02 and other crankpins.

vi) It was jointly decided to undertake the grinding of crankpin number #02 and polishing the remaining crankpins to remove the bearing line marks and to improve the surface finish.

vii) Although in the crankpin numbers #01,#03,#04,#05,#06,#07, and #08 the ovality was observed on the higher side as 0.10 MM, however, this was accepted under divation.

viii) The Crankpin number #02 was undersized by 1.5 MM, A Final Dimensional Report after grinding and polishing of crankpins of Yanmar 8N 330L EV is pasted below.

ix) In order to assist ship staff, our technicians undertook the dimensional and MPI Inspection of connecting rods available on the vessel, they were observed within limits.

The engine was commissioned during the presence of our technicians on the vessel.

We have been regularly executing on site crankshaft repairs and In Situ crankshaft grinding in Dubai, Fujairah, Qatar, Saudi Arabia, Oman, Iraq, Togo, Malta, Freetown, Egypt, Malaysia, Iran, Indonesia, Vietnam, Jordan, etc.

We have a team of trained technicians available 24/7 hrs and can be deputed on short notice. Some of our technicians also have valid US VISA and can fly to South America, Caribbean countries, etc.

For more information regarding crankshaft grinding services, please contact us at rajshahani@rapowersolutions.com or info@rapowersolutions.com or call us at +91 9582647131 or +91 9810012383.

The post Onsite Repair of Yanmar 8N 330L EV Crankshaft in Panama appeared first on Crankshaft Grinding Repair.