We recently completed a successful onsite repair of a BERGEN B32:40L8P engine crankshaft onboard a vessel in Jamaica.

The details of the job are as follows:

Onsite Inspection of Crankshaft – BERGEN B32:40L8P

• Two of our experienced technicians, along with our portable onsite crankshaft grinding equipment, traveled from New Delhi, India, to Jamaica.
• Our equipment is lightweight, compact, and portable, allowing it to be transported as accompanied baggage, which eliminates delays associated with cargo shipment and customs clearance.
• Upon boarding, the vessel was found fully loaded with containers, yet our team immediately initiated the crankshaft inspection.
• It was observed that Crankpin No. 5 had suffered severe damage due to a bearing failure.
• The crankpin was thoroughly cleaned, and embedded bearing material was carefully removed.
• Dimensional checks revealed:
  • Minimum Diameter: 269.75 mm
  • Maximum Diameter: 270.00 mm
  • Ovality: 0.25 mm
  • Deep scoring marks were also noted due to the bearing failure.
• A Magnetic Particle Inspection (MPI) using a high-intensity Magnaflux torch was conducted to check for cracks. No cracks or abnormalities were detected.
• Hardness testing was performed, and confirmed that values remained within permissible limits.

Onsite Grinding of BERGEN Crankpin

• The crankpin was calibrated and ground in multiple stages, with ovality strictly controlled during the process.
• Due to deep scoring, the crankpin had to be ground to an undersize of 2 mm.
• The final dimension achieved was 268.00 mm – 0.02 mm, ensuring precision and compliance with engine requirements.

Engine Commissioning

• The vessel had a 2 mm undersize bearing in stock, which was installed immediately after grinding.
• A trial run of the engine was conducted in the presence of our technicians, and performance was found to be fully satisfactory.

About RA Power Solutions

We are a global leader in onsite crankshaft grinding and repair services for crankpins and main journals up to 700 mm. With over four decades of hands-on experience, we are Asia’s most established and trusted company in this field.

We are the original developers and manufacturers of portable onsite crankshaft grinding machines. Our machine design originates from a reputed Italian engineering firm. To date, we have supplied over 80 onsite crankshaft grinding machines across the globe.

In addition to repair services, we also supply the complete range of tools and measuring instruments necessary for crankshaft repairs.

We offer hands-on training programs for client technicians at our in-house training center in New Delhi, India, conducted by our expert engineers. Our training sessions have been successfully delivered to clients from Colombia, Panama, Ecuador, Dubai, Singapore, Bangladesh, Tanzania, and many other countries.

For more information regarding crankshaft grinding services, Crankshaft Repair, please contact us at rajshahani@rapowersolutions.com or info@rapowersolutions.com or call us at +91 9582647131 or +91 9810012383.

The post Crankshaft Repair | Onsite Crankshaft Grinding | BERGEN Engine | 45 Years Experience appeared first on Crankshaft Grinding Repair.

RA Power Solutions was approached and deputed our two technicians along with onsite crankshaft grinding equipment. The vessel was anchored at MIP Mersin, Turkey.

Following are the major Engine and Crankpin details:

HIMSEN HYUNDAI 6H 17/28 CR Pin Having Hairline Crack

Main Observations of Crankshaft of HIMSEN HYUNDAI 6H 17/28

i) On visual inspection, it was found that it was a case of lubricating oil pump failure, damaging the bearings of all connecting rods.

ii) The bearing material was found embedded on all six (6) crankpins and was carefully removed. After polishing the crankpins, the dimensional inspection was conducted. The taper, ovality ranging from 0.22 MM to 0.86 was observed.

CR Pin Hardness Inspection	CR Pin of HIMSEN HYUNDAI 6H 17/28 Before Repair

The Dimensional Inspection Report of Six (6) Number Crankpins of HIMSEN HYUNDAI 6H 17/28:

iii) The hardness was checked and was found within limits, except for a few spots, which were found not harmful to the crankshaft.

iv) The crankpins were subject to a MPI test for crack detection and minor hairline cracks were observed, All other parameters were found within the limit.

Crank Pin Before Repair	HIMSEN HYUNDAI 6H 17/28 After Grinding And Polishing

Action Taken By RA Power Solutions Technicians For Damaged Crankpins:

i) The grinding of all six (6) crankpins was undertaken by our insitu crankshaft grinding machine.

ii) Three (3) number of crankpins diameter was reduced by 1.00 MM and the final size was maintained as 174.00 MM.

iii) Three (3) number of crankpins diameter was reduced by 1.50 MM and the final size was maintained at 173.50 MM.

Final Report After Grinding is Pasted Below:

The tolerance of all six (6) number crankpins was maintained with 0.02 MM.

We have been regularly executing on site crankshaft repairs and In Situ crankshaft grinding in Dubai, Fujairah, Qatar, Saudi Arabia, Oman, Iraq, Togo, Malta, Freetown, Egypt, Malaysia, Iran, Indonesia, Vietnam, Jordan, etc.

We have a team of trained technicians available 24/7 and can be deputed at short notice. Some of our technicians also have valid US VISA and can fly to South America, Caribbean countries, etc.

For more information regarding crankshaft grinding services, onsite insitu crankshaft repair, crankshaft grinding and repair, grinding of onsite crankshaft repair, insitu crankshaft grinding repair, grinding of crankshaft onsite please contact us at rajshahani@rapowersolutions.com or info@rapowersolutions.com or call us at +91 9582647131 or +91 9810012383.

The post HIMSEN HYUNDAI 6H 17/28 Crankshaft Repair In Turkey appeared first on Crankshaft Grinding Repair.