The major crankshaft details of the MAN B&W 5L 16/24 are as follows:

In the case of the MAN B&W 5L 16/24 crankshaft, the crankpin diameter is relatively small at 130.00 mm, with a bearing width of only 56.00 mm. To facilitate onsite crankshaft grinding of the crankpin, RA Power Solutions has designed and developed a dedicated onsite crankshaft grinding machine. This machine can be inserted through the inspection window, allowing grinding to be carried out efficiently.

RA Power Solutions deputed technicians, along with equipment, and the following actions were taken:

i) Excessive ovality of 0.97 mm was observed on crankpin No. 03 of the auxiliary engine. Line marks were also noted.
ii) All other parameters, such as hardness, MPI (for crack detection), and visual inspection, were checked and found to be within limits.

iii) Grinding of crankpin No. 03 was carried out, and the diameter was maintained at 128.50 mm (undersized by 1.50 mm).

Advantages of Engaging RA Power Solutions for Repair of Crankshaft – MAN B&W 5L 16/24

i) As a designer and manufacturer of onsite crankshaft grinding machines, we undertake modifications to the equipment, if required, to ensure the successful repair of the crankshaft.

ii) In this case, since the crankpin diameter is only 130.00 mm and the bearing width is 56.00 mm, we developed equipment capable of both grinding and polishing.

iii) We maintain a stock of bearings for popular engine makes and models, including undersized and special sizes. In this case, the required bearings were carried by our technicians, and the engine was commissioned immediately after the crankshaft repair.

Availability of Undersized Crankpin Bearings in Stock of MAN B&W Engine Model No. 5L 16/24

RA Power Solutions has consistently dedicated itself to delivering exceptional and prompt service. With over 46 years of experience, we have successfully repaired more than 10,000 crankshafts worldwide.

We have been regularly providing our services in South Africa, Nigeria, Cambodia, Tanzania, Brazil, Canada, Australia, Bangladesh, Greece, Haiti, Hong Kong, Indonesia, Kenya, Malaysia, Maldives, Kenya, Kuwait, Madagascar, Mexico, Nigeria, Oman, Philippines, Saint Lucia, Saudi Arabia, Singapore, Spain, Sint Maarten, Sri Lanka, Suriname, Thailand, Togo, United Kingdom, United States, Yemen, Zambia, etc.

For more information regarding crankshaft grinding services, please contact us at rajshahani@rapowersolutions.com or info@rapowersolutions.com or call us at +91 9582647131 or +91 9810012383.

The post Machining of MAN B&W 5L16/24 Crankshaft appeared first on Crankshaft Grinding Repair.

The non-operation of two auxiliary engines stranded the vessel. Considering the urgency of the situation, RA Power Solutions deputed two technicians along with a specially designed onsite crankshaft grinding machine capable of grinding crankpins with small diameters and narrow widths.

In the case of the MAK 6M20 auxiliary engine, the standard diameter of the crankpin is only 152.00 mm, with a bearing width of 71 mm. The design of our onsite crankshaft grinding machine is such that it can be mounted on the crankpin diameter through the inspection window, and grinding is executed in situ.

The details of the engine are as follows:

Upon arrival on board the vessel, our technicians conducted an initial inspection of all crankpins. They found excessive ovality in all six crankpins of the MAK 6M20 engine.

We have provided a copy of the preliminary dimensional inspection report below.

All other parameters, including hardness, MPI, and deflection, were within acceptable limits. We jointly decided to grind all the crankpins, and RA Power Solutions machined them to a final size of 151.00 mm (1.00 mm undersize) as per the above dimensions.

During the stay of our technicians on board the vessel, the crankshaft of Auxiliary Engine #02 was also inspected. We detected excessive ovality showing the same pattern observed in the crankshaft of Auxiliary Engine 01.

The preliminary dimensional inspection report is provided below:

SIZE OF CR Pins Before Grinding of A/E 02
	A	Aa	C	Cc	B	Bb	Min	STD	Ovality
CR-1	151.73	151.85	151.74	151.84	151.75	151.82	151.73	152.00	0.27 MM
CR-2	151.73	151.85	151.72	151.83	151.70	151.81	151.7	152.00	0.30 MM
CR-3	151.72	151.85	151.71	151.84	151.69	151.83	151.69	152.00	0.31 MM
CR-4	151.75	151.85	151.72	151.84	151.73	151.86	151.72	152.00	0.28 MM
CR-5	151.73	151.84	151.69	151.82	151.70	151.84	151.69	152.00	0.31 MM
CR-6	151.73	151.92	151.72	151.89	151.75	151.84	151.72	152.00	0.28 MM

Our technicians ground this crankshaft and maintained the following dimensions. They successfully commissioned both engines in their presence.

SIZE OF CR Pins After Grinding A/E 02
	A	Aa	C	Cc	B	Bb	Min	Max	Ovality
CR-1	151.00	150.99	150.99	150.98	150.99	151	150.98	151.00	0.02 MM
CR-2	151.00	150.99	150.99	150.98	151.00	150.98	150.98	151.00 0.02 MM	0.02 MM
CR-3	151.00	150.99	150.98	150.98	150.99	151.00	150.98	151.00	0.02 MM
CR-4	151.00	150.99	150.98	150.99	150.99	151.00	150.98	151.00	0.02 MM
CR-5	151.00	150.99	150.98	150.98	150.99	151.00	150.98	151.00	0.02 MM
CR-6	151.00	150.99	150.98	150.98	150.99	151.00	150.98	151.00	0.02 MM

The post MAK 6M20 Crankshaft Repair in Baku, Azerbaijan appeared first on Crankshaft Grinding Repair.

Following are the main observations of MAN Diesel Engine

• The crank pin of the engine has a diameter of 130 mm with a bearing width of 56 mm.
• All the crank pins had scoring marks and bearing line marks due to the seizure of the crankpin bearing.
• The dimensional inspection was done and the crank pins had taper and ovality in the range of 0.2 mm to 0.4 mm.
• The hardness was checked and was observed within the limits.
• MPI check was done and few hairline cracks were observed.
• The deflection and runout were observed within the limit.

Action taken by RA Power Solutions

• The grinding of crank pins was undertaken and all the crank pins diameter was maintained within 0.4 mm.
• Crankpin No.3 had deep bearing line marks due to the seizure of the crankpin bearing. The grinding of the crank pin to 0.6 mm was done which is the last size recommended by the engine manufacturer.
• As per the manufacturers since the damage to the crankpin was more than the last limits specified Crankshaft stands rejected and the purchase of a new crankshaft was recommended.
• To save the crankshaft from rejection, RA Power Solutions decided to continue the grinding of the crank pin to the undersize of 1.0 mm under deviation
• The under-size bearing was supplied through one of our associate manufacturers of bearings. The engine was put into operation and has been performing satisfactorily for the last more than nine months.

Expertise available with RA Power Solutions to save the crankshaft from rejection

Having on hand experience of more than forty years, RA Power Solutions has repaired thousands of crankshafts of marine engines and engines installed in power plants which were rejected by the engine manufacturer for the following reasons.

• The damage to the crankpin or main journal was more than the last limit specified by the engine manufacturer.
• Presence of cracks in the crank pin and main journal.
• Observation of higher hardness due to the seizure of bearing.
• Observation of higher runout and deflection.
• RA Power Solutions as the name suggests has the well-tried and tested solution, technology, and equipment available to repair the diesel crankshaft having the above defects.

Don’t reject the crankshaft, reduce the cost of maintenance, and contact RA Power Solutions for a successful repair. Use our technology, equipment, and experienced technicians to save your crankshaft from rejection.

For more information, about MAN Diesel Engine, and diesel engine crankshaft repair, please email us at rajshahani@rapowersolutions.com, or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

The post Crankshaft Repair of MAN Diesel Engine having Small Diameter appeared first on Crankshaft Grinding Repair.