We have been extending onsite crankshaft repair services for medium & heavy equipment for over four decades and the services are extended all over the world. We also execute repairs of the crankshaft on a moving vessel and there is no requirement to hold it.

Advantages of Crankshaft Repair Services offered by RA Power Solutions

We are mentioning below a few of the advantages of getting crankshaft repair executed by RA Power Solutions.

• We believe that the crankshaft is a piece of art and even for the heavy crankshafts the tolerance in terms of taper and ovality ranges between 20 to 50 microns which is very little and requires experience, special skill, and dedicated latest design of equipment to maintain.
• A Power Solutions is the only manufacturer of the onsite crankshaft grinding machine in the world and has supplied over 70 machines which are in operation by leading shipping companies, Power Plants repair workshops, etc.
• Our designing and manufacturing of onsite crankshaft grinding machines for crankshaft repair can be easily modified according to the site requirements.
• Difficult and serious damage to the crankshaft is successfully repaired as we have in-house capability of modifying our equipment as per the site requirement and condition.
• Most of the companies based in Europe, and the UK undertaking crankshaft repair cannot successfully execute the repair of crankshaft radius fillet which is damaged or worn out due to accident. They always recommended either removing the crankshaft from the engine block and sending it to the workshop or rejecting it.
• We have onsite crankshaft grinding equipment by which repair of the crankshaft can be successfully executed despite damage to the radius fillet of both sides. We have a record of more than thousands of crankshaft repair cases where the radius fillet was damaged.
• We have facilities and modern equipment to undertake non-destructive tests including hardness checks, crack detection checks by MPI dimensions checks, etc.

Availability of trained & experienced technicians for crankshaft repair

• All our technicians are trained in our in-house training school near New Delhi, the capital of India.
• The technicians are trained on dummy crankshafts under senior supervision and have experience of 30 and 40 years in crankshaft repair.
• Our mission is to create awareness and make it understandable to our clients all over the world that it is not a difficult task to repair the crankshaft, which few companies have been propagating and making a monopoly by charging exorbitant prices.

Low cost of crankshaft repair offered by RA Power Solutions

• We are the cheapest in the world executing crankshaft repair at minimum cost.
• We don’t charge separately for NDT tests, cost for repair of radius fillet, out-of-station allowance, etc.
• We have successfully executed damaged crankshaft repair of MAN B&W, Yanmar, Daihatsu, Wartsila, Ruston & Hornsby Engine, etc.

For more information regarding crankshaft repair services, please email us at rajshahani@rapowersolutions.com, or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

The post Crankshaft Repair Services by RA Power Solutions appeared first on Crankshaft Grinding Repair.

Don’t get repairs done from inexperienced companies:

This is important as we have observed that shipping companies get in touch with the general workshops that have no experience, expertise, or dedicated equipment for crankshaft repairs. This results in substandard repairs and rejection of the crankshaft as the tolerances specified by the manufacturers are not maintained.

Secondly, we have also noticed that in certain cases to immediately put the engine into operation, the hand polishing is done by rope or any other polishing media. We have experienced that by no way the taper and ovality can be minimized or controlled by hand polishing. The hand polishing of the crankpin and journal of the crankshaft only improves the surface finish which is of no use in case taper and ovality in the crankpin/main journal diameter is present.

Making Informed Decisions About Crankshafts Repair

The managers and the marine engineers should keep in mind not only the exorbitant price of the crankshaft but also its availability and the efforts required to connect it to the vessel. At RA Power Solutions, we consider a crankshaft to be a piece of art having the closest possible tolerances and requirement of high surface finish, we have with our experience learned to investigate in-depth the problem in the crankshaft and prepare the plan for crankshaft grinding repair.

We have saved thousands of crankshafts from rejection which were spoiled because of the wrong procedure of crankshaft repair followed by inexperienced and small repair companies. The most modern onsite grinding equipment available with us is up to 700 mm in diameter. With a combination of experienced technicians and onsite crankshaft grinding equipment, we ensure that crankshaft repair is done strictly as per the manufacturer’s specifications and international standards.

In this time of recession, the cost of crankshaft reconditioning is of great importance. We are considered to be the lowest-priced company in the world giving tough competition to the crankshaft repair companies based in Europe, Singapore, and the UK, who till now enjoyed the monopoly and charged exorbitant amounts from the ship owners.

We are also the manufacturer of onsite portable grinding machines. The machines are manufactured based on our experience in this field and the inputs given by our technicians from time to time. More than 70 onsite crankshaft grinding machines have been sold all over the world. We also extend training to the clients, and technicians to ensure that they can execute the crankshaft reconditioning successfully.

Need more information on crankshaft repair and crankshaft reconditioning, please email us at rajshahani@rapowersolutions.com, or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

The post Crankshaft Repair Services by Experts on Lowest Prices | Crankshaft Reconditioning appeared first on Crankshaft Grinding Repair.