The non-operation of two auxiliary engines stranded the vessel. Considering the urgency of the situation, RA Power Solutions deputed two technicians along with a specially designed onsite crankshaft grinding machine capable of grinding crankpins with small diameters and narrow widths.

In the case of the MAK 6M20 auxiliary engine, the standard diameter of the crankpin is only 152.00 mm, with a bearing width of 71 mm. The design of our onsite crankshaft grinding machine is such that it can be mounted on the crankpin diameter through the inspection window, and grinding is executed in situ.

The details of the engine are as follows:

Upon arrival on board the vessel, our technicians conducted an initial inspection of all crankpins. They found excessive ovality in all six crankpins of the MAK 6M20 engine.

We have provided a copy of the preliminary dimensional inspection report below.

All other parameters, including hardness, MPI, and deflection, were within acceptable limits. We jointly decided to grind all the crankpins, and RA Power Solutions machined them to a final size of 151.00 mm (1.00 mm undersize) as per the above dimensions.

During the stay of our technicians on board the vessel, the crankshaft of Auxiliary Engine #02 was also inspected. We detected excessive ovality showing the same pattern observed in the crankshaft of Auxiliary Engine 01.

The preliminary dimensional inspection report is provided below:

SIZE OF CR Pins Before Grinding of A/E 02
	A	Aa	C	Cc	B	Bb	Min	STD	Ovality
CR-1	151.73	151.85	151.74	151.84	151.75	151.82	151.73	152.00	0.27 MM
CR-2	151.73	151.85	151.72	151.83	151.70	151.81	151.7	152.00	0.30 MM
CR-3	151.72	151.85	151.71	151.84	151.69	151.83	151.69	152.00	0.31 MM
CR-4	151.75	151.85	151.72	151.84	151.73	151.86	151.72	152.00	0.28 MM
CR-5	151.73	151.84	151.69	151.82	151.70	151.84	151.69	152.00	0.31 MM
CR-6	151.73	151.92	151.72	151.89	151.75	151.84	151.72	152.00	0.28 MM

Our technicians ground this crankshaft and maintained the following dimensions. They successfully commissioned both engines in their presence.

SIZE OF CR Pins After Grinding A/E 02
	A	Aa	C	Cc	B	Bb	Min	Max	Ovality
CR-1	151.00	150.99	150.99	150.98	150.99	151	150.98	151.00	0.02 MM
CR-2	151.00	150.99	150.99	150.98	151.00	150.98	150.98	151.00 0.02 MM	0.02 MM
CR-3	151.00	150.99	150.98	150.98	150.99	151.00	150.98	151.00	0.02 MM
CR-4	151.00	150.99	150.98	150.99	150.99	151.00	150.98	151.00	0.02 MM
CR-5	151.00	150.99	150.98	150.98	150.99	151.00	150.98	151.00	0.02 MM
CR-6	151.00	150.99	150.98	150.98	150.99	151.00	150.98	151.00	0.02 MM

The post MAK 6M20 Crankshaft Repair in Baku, Azerbaijan appeared first on Crankshaft Grinding Repair.

Deputation of RA Power Solution technicians to Suez Port:

RA Power Solutions deputed two technicians, along with an onsite crankshaft grinding machine and necessary measuring instruments, to Suez Port, where they boarded the vessel. The inspection of crankshaft was conducted as per the RA Power Solutions protocol.

The following are the main observations:

(i) On the visual inspection of the crankpins, it was observed that all seven crankpins were damaged. The bearing material was embedded on a few of the crankpins. The deep bearing line marks and rough surface are also observed.

(ii) The hardness of the crankpin was taken, and no abnormality was observed.

(iii) The crack detection of all seven crankpins was undertaken by the MPI method, and no crack was observed.

(iv) On dimensional inspection of the crankpins, orality in the range of 0.10 mm to 0.26 mm was observed in the case of six crankpins. In the remaining one, a crankpin ovality of 1.40 mm was observed.

The standard details of the crankshaft are as follows:

Action taken by RA Power Solutions for the successful repair of MAN B&W crankshaft:

(i) Six numbers of crankpins were undersized by 0.5 mm.

(ii) One number of crankpins was undersized by 2.0 mm.

(iii) We strictly maintained all parameters as per the manufacturer’s requirements and the maintenance manual.

Global Onsite Crankshaft Grinding & Crankpin Repair Services

RA Power Solutions is a leading global provider of onsite crankshaft grinding, crankpin repair, and journal machining for marine and industrial engines. With 45+ years of experience, we deliver fast, reliable, and cost-effective crankshaft repair services anywhere in the world—directly onboard your vessel or at your power plant.

Our engineers travel worldwide to execute in situ crankshaft grinding, eliminating downtime and avoiding the costly replacement of damaged crankshafts.

We have successfully completed repair projects in:

Egypt, UAE, Saudi Arabia, Qatar, Oman, Kuwait, Singapore, Malaysia, Indonesia, Turkey, Greece, Bangladesh, Sri Lanka, Azerbaijan, Nigeria, Ghana, and multiple West African regions.

We specialize in restoring crankshafts for major engine brands and models, including:

• MAN B&W: 7L23/30H, 5L23/30, 6L23/30, 6L21/31, 6S35MC, 7S50MC
• MAK: 6M20, 8M20, 6M32, 8M32, 8CM32C
• Daihatsu: 6DK-20, 5DK-20, 6DE-18
• Wartsila: Vasa 12V32LN, 6L32, 9L20
• Caterpillar: G3616, 3508, 3516
• Yanmar: EY18, EY22, 6N165

Using portable, advanced onsite machining tools, we undertake:

• Crankpin grinding & undersize machining
• Main journal grinding
• Ovality & taper correction
• Crack detection (MPI)
• Hardness testing & dimensional inspection

Whether your ship is docked or sailing, we deliver OEM-standard accuracy, restore the crankshaft quickly, and minimize your downtime.

RA Power Solutions continues to be the preferred choice for in place machining and grinding and global crankshaft grinding services, trusted by shipping companies, offshore operators, and power plants worldwide.

For any information, please email us at rajshahani@rapowersolutions.com, info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

The post In place Crankshaft Machining And Grinding of MAN B&W Engine Model 7L23/30H appeared first on Crankshaft Grinding Repair.

We have developed a revolutionized tooling which has the capabilities to execute the repairs to close tolerances as stipulated in the engine manufacturer’s manual.

Case Study of Repair of MAK-1 8CM32C Engine Crankshaft In Burkina Faso, West Africa

The major details of the crankshaft of the MAK-1 8CM32C Engine are as follows:

i) Due to the repeated failure of bearings, it was decided by the client to get an audit of the crankshaft for all the major parameters. RA Power Solutions deputed two (2) technicians along with the onsite crankshaft grinding machine from New Delhi to Burkina Faso. During the initial inspection, the following was checked and observed.

a) The dimensional inspection of the crankpins was conducted, and excessive ovality was observed in all the crankpins. The readings for all the crankpins are pasted below:

b) As protocol, all the crankpins were checked for hardness by a portable hardness tester and were found within limits.

c) MPI was also undertaken to check the cracks, and no abnormality was observed.

ii) The grinding of all the eight (8) crankpins was executed onsite by our technicians. The first step size and tolerance of 0.02/0.03 MM were maintained.

In Place Machining of Crankshaft of MAK-1 8CM32C Engine

RA Power Solutions has been successfully executing the repair of high-diameter crankshafts up to 700 mm. We also specialize in onsite grinding of small-diameter crankpins with a bearing width of the crankpin as low as 50 mm to execute onsite such types of complex crankshaft repairs onsite. We have developed special-purpose onsite crankshaft machining equipment by which the repairs can be executed. We execute repairs for Marine, industrial, stationary power, and offshore sectors all over the world.

Our technicians are available to travel worldwide on short notice. Additionally, several of our technicians hold valid US visas, enabling them to travel to South America, the Caribbean, and other destinations as needed.

At RA Power Solutions, we provide specialized crankshaft grinding machines, onsite crankshaft grinding repair, insitu crankshaft grinding, Onsite crankshaft grinding machines,  insitu crankshaft grinding machines, crankpin bearings, metal stitching, metal locking, engine block repair, crack repair by metal stitching, cast iron crack repair, crankpin polishing, inspection of crankshaft, crankshaft inspection, rebabbitting bearing, babbitt white metal, engine overhauling, grinding of crankpin, connecting rod, and turbine shaft bearing services worldwide, including South Africa, Singapore, Greece, Dubai, Iraq, Iran, Malaysia, Colombia, and Brazil.

For more information regarding crankshaft grinding services, please contact us at rajshahani@rapowersolutions.com or info@rapowersolutions.com or call us at +91 9582647131 or +91 9810012383.

The post In Place Crankshaft Machining and Grinding of MAK-1 8CM32C Engine In Burkina Faso , West Africa appeared first on Crankshaft Grinding Repair.

Efficient Repairs, Delivered On Site

On site crankshaft repair eliminates the need to dismantle and ship large engine components. Instead, skilled technicians bring precision tools and advanced equipment directly to your location. Whether on a vessel at sea, an offshore platform, or a remote industrial plant, repairs are carried out in situ with the same accuracy as workshop-based service. This significantly reduces engine downtime and associated logistics costs.

Common crankshaft issues such as journal wear, scoring, taper, ovality, cracks, or bearing damage can now be rectified on site. By machining and grinding crankpins or main journals without removing the crankshaft, repairs can be completed in a fraction of the time. The portable equipment used is engineered to deliver high-precision results, often within tolerances of a few microns. Once the machining is done, final checks like hardness testing, alignment inspection, and surface finish measurement ensure the crankshaft is restored to OEM standards.

Why Choose RA Power Solutions for On Site Crankshaft Repair?

RA Power Solutions is a well-known name in the field of in situ engine repairs, with decades of expertise providing high-quality crankshaft services globally. To achieve consistent, long-lasting results, our expert specialists use cutting-edge equipment and strictly adhere to quality control protocols. We specialize in doing on site crankshaft repair swiftly and efficiently, saving downtime while keeping high-quality standards.

This approach not only saves time and money but also extends the life of engine components. It reduces the need for expensive replacements. RA Power Solutions is committed to helping clients operate without disruption. Whether it’s for a commercial ship, power plant, or critical industrial machinery.

If your engine is showing signs of crankshaft damage—such as unusual noise, vibration, or performance loss—don’t wait. We offer immediate response and tailored repair services across the globe. Trust RA Power Solutions to bring world-class service to your site.

For more details of the On Site Crankshaft Repair, Crankshaft Grinding Services, In Situ Crankshaft Grinding, or email us at info@rapowersolutions.com, Call at +91-9582647131,+91 9810012383.

The post On Site Crankshaft Repair – A Smarter Solution for Engine Maintenance appeared first on Crankshaft Grinding Repair.